The Micro-Jr. is a fully automatic microprocessor controlled 10 Amp Micro-ohm meter. This system has the highest measuring range (0.1 m to 400 k ) and the highest accuracy available. It is lightweight, portable and battery operated.

• The system has an enhanced software program that can measure and determine a valid reading, which then is placed in memory. The system will then continue to measure for the next reading without any operator intervention. This feature becomes very valuable when trying to make measurements and not having a free hand to press the test button.
  
• The Lithium Ion battery allows for continuous operation for over 5 hours at 10 amps.
  
• The Micro-Jr. is designed to give highly accurate readings in the field with laboratory precision.

Model: Micro-Jr.
Size: L: 16in. (406 mm) W: 13in. (330 mm) H: 7in. (178 mm)
Weight: 13 lbs.
Input Power: 100 to 250 VAC 50 / 60 Hz Autoranging battery charger
Test Current: User Selectable: 10, 1, 0.1, 0.01, 0.001 Ampere
Panel Display: LCD Graphic with back lighting
Front Panel: Sealed anodized with a multi-actuation rotary knob
Interface: 9 Pin RS232 Serial / 25 Pin Centronics Parallel
Memory storage: Internally stores up to 30 complete test results

• Microprocessor based system
• Automatic measurements of low resistance
• Automatic current reversal mode for greater accuracy
• Internal storage for 30 test results
• Response time is less than 2 seconds
• Single push button operation
• Automatic shut-off to extend battery life
• Runs for more than 5 hours continuous at 10 amps
• Safety Emergency shut off switch
• Complete automatic calibration system
• Heavy duty protection circuitry
• Centronics (Parallel) Interface & RS232 (serial) Interface
• 5 Year standard warranty

• Current and Potential lead set – 3 meters in length, each, 4 wires total
• Lithium Ion battery charger with 6 ft. power cord
• Operation manual
• Test Certificate

• MJ02 - Custom clamping devices (user specified)